Filter By:
- Bar Ends (1)
- BMX (1)
- Bottom Brackets (24)
- Brakes/Levers/Pads (36)
- Cables (21)
- Cassettes/Freewheels (30)
- Chainrings (15)
- Chains (23)
- Show More Categories
- Cranksets (14)
- Derailleurs (35)
- Forks (3)
- Groups (3)
- Handlebar Grips/Tape (21)
- Handlebars (6)
- Headsets (7)
- Pedals (17)
- Saddles (15)
- Seatposts (8)
- Shift/Brake Combinations (7)
- Shifters (13)
- Stems (12)
- Other (83)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts

$69.95
Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength.
- Upfront cable fixing
- Large diameter ball bearing
- Cable-kind clamp
- Low-profile, light action
- Integrated cable adjust
- Breakaway axle pivot
- High-traction lever
- Broad compatibility

$84.95
The direct mount chainrings for SRAM cranksets with the 3-bolt mounting interface. They replace your existing spider and chainring with one clean looking, lightweight, and stiff piece of machined billet. They are available in the Drop-Stop B tooth profile, which is optimized for SRAM Flattop chain. It is also compatible with all other 9-, 10-, 11-, and 12-speed chains except the Shimano 12-speed chain.
Compatibility:
- These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that these chainrings are NOT compatible with SRAM 8-bolt direct mount cranksets.
- Wolf Tooth's patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability
- There is one offset:
Standard Road/CX/Gravel: 6mm offset for cyclocross and road crank applications with 47mm chainline
- Praxis Works Road/CX cranks use the 6mm offset.
- If using a 9-speed drivetrain, use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).
Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A.
DROP-STOP B
- Compatible 9, 10, 11, and 12spd SRAM Eagle, 12spd SRAM Transmission (T-type) Flattop, 12spd Campy, 12spd KMC
- Not compatible with 12spd Shimano HG+ chains
Recommendations -
- Recommend the use of a clutch style rear derailleur for the best chain security.
- An L-wrench works best since the crank spindle may contact a socket adapter and prevent it from engaging properly.
- Use the same 3 bolts to attach the Wolf Tooth ring or we carry replacement bolts
Tech Specs:
- Weights: 38T/90g | 40T/106g | 42T/111g
- Material: 7075-T6 aluminum
- Made in the USA

$42.00 - $45.00
Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.
$2.00
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$13.60
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$18.64
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function

$20.00
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.

$22.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA

$27.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA

$47.25
BB30 service kit includes 2 Enduro 6806 ABEC-3 sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems - Enduro ABEC-3 bearings

$26.00
TruVativ Power Spline Bottom Bracket fits proprietary powerspline design popular as OE spec with many moderate-price TruVativ cranks.
• Proprietary spline design popular as OE spec with many moderate-price TruVativ cranks
• Crank bolts are included

$50.00 - $54.00
Striking the balance between light weight, long life and durability, TruVativ's Giga Pipe Team SL Bottom Bracket uses 3 sealed cartridge bearings to provide smooth pedaling season after season. For serious strength, the Giga Pipe boasts CNC-machined aluminum cups and a stiff chromoly spindle, too.

$7.99
Grips are a key point of contact between you and your bike. Comfortable grips are a must-have.
Product details
- Designed for use on kids' bikes with twist shifters
- Set of two grips
Specifications
- Diameter: 22.2mm
- End Type: Closed
- Lock-on: No
- Material: Kraton Rubber

$9.50
Replacement levers for Trek kids' bikes.
Genuine replacement parts
Replace your worn or damaged brake levers for proper braking operation.
- Sized for smaller hands
- Two-finger lever operation

$9.99
Genuine replacement parts
When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered.
Upgrade or refresh your bike.
- Replacement downtube strike plate for 2012 Madone
- Self adhesive

$17.99
Get back on the road with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: 2-bolt

$17.99
Get back on the trail with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: 1-bolt

$17.99
Get back on the road with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: 2-bolt

$17.99
Get back on the road with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: 2-bolt

$19.99
Get back on the trail with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 142x12mm Thru Axle
- Mounting location: Rear drive side
- Attachment: Thru axle nut

$20.99
Get back on the trail with a quality replacement hanger.
- Trek/Fisher full suspension rocker pivot suspension hardware
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 148x12mm Thru Axle
- Mounting location: Rear drive side
- Attachment: Thru axle nut

$24.99
Get back on the trail with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: Thru axle nut

$24.99
Get back on the trail with a quality replacement hanger.
- Attachment hardware is sold separately
- For use with 135x5mm hubs
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: Thru axle nut

$24.99
Get back on the trail with a quality replacement hanger.
- Attachment hardware is sold separately
- For use with 142x12mm, 148x12mm, 157x12mm, and 197x12mm hubs
Specifications:
- Size: Rear drive side, Thru Axle
- Mounting location: Rear drive side
- Attachment: Thru axle nut

$29.99
Get back on the road with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 148x12mm Thru Axle
- Mounting location: Rear drive side
- Attachment: Thru axle nut

$31.99
Genuine replacement parts
Genuine Trek replacement part to unload the battery.
Original Equipment specifications.
Compatible with Bosch Powertube RIB batteries.
- The handle comes with the spring and RIB handle Spring loaded plunger
- Hardware should be ordered separately

$31.99
Genuine replacement parts
Get back on the trail with a quality replacement hanger.
Don't be left hanging.
- Attachment hardware is sold separately
- Compatible with Superfly SS 2015-2016 (142x12mm OLD)
- Compatible with Stache 29+ 2016-2022 (148x12mm OLD)
- Compatible with 1120 2018-2022 (148x12mm OLD)
- Compatible with Farley 2016-2022 (197x12mm OLD)

$34.99
Handlebar tape that's made from partially recycled materials and designed for a comfortable, durable, and tacky grip feel.
Tape for confident and comfortable riding
Perfect for white-knuckle crits, 100-mile gravel rides, and weekend adventures, EcoTack handlebar tape has a tacky, confidence-inspiring grip with vibration-damping comfort. Plus, It's made from partially recycled material.
- 3mm of shock-absorbing foam elevates comfort
- Super-tacky texture offers a no-slip grip
- Made from 45% recycled materials and 29% biobased foam
- Ideal stretch for quick and easy installation
- Adhesive backing simplifies installation
- Finishing strips and reflective Trek bar end plugs included
- Weight: 108g
Page 1 of 14
Next page