Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

$69.95
Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength. - Upfront cable fixing - Large diameter ball bearing - Cable-kind clamp - Low-profile, light action - Integrated cable adjust - Breakaway axle pivot - High-traction lever - Broad compatibility
$84.95
The direct mount chainrings for SRAM cranksets with the 3-bolt mounting interface. They replace your existing spider and chainring with one clean looking, lightweight, and stiff piece of machined billet. They are available in the Drop-Stop B tooth profile, which is optimized for SRAM Flattop chain. It is also compatible with all other 9-, 10-, 11-, and 12-speed chains except the Shimano 12-speed chain. Compatibility: - These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that these chainrings are NOT compatible with SRAM 8-bolt direct mount cranksets. - Wolf Tooth's patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability - There is one offset: Standard Road/CX/Gravel: 6mm offset for cyclocross and road crank applications with 47mm chainline - Praxis Works Road/CX cranks use the 6mm offset. - If using a 9-speed drivetrain, use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. DROP-STOP B - Compatible 9, 10, 11, and 12spd SRAM Eagle, 12spd SRAM Transmission (T-type) Flattop, 12spd Campy, 12spd KMC - Not compatible with 12spd Shimano HG+ chains Recommendations - - Recommend the use of a clutch style rear derailleur for the best chain security. - An L-wrench works best since the crank spindle may contact a socket adapter and prevent it from engaging properly. - Use the same 3 bolts to attach the Wolf Tooth ring or we carry replacement bolts Tech Specs: - Weights: 38T/90g | 40T/106g | 42T/111g - Material: 7075-T6 aluminum - Made in the USA
$42.00 - $45.00
Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.
$2.00
Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function
$13.99
Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function
$17.10
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.
$18.99
Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function
$22.05
Loose ball bearings in bags or bottles. - Replacement loose ball bearings
$22.50
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA
$27.99
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA
$50.99
BB30 service kit includes 2 Enduro 6806 ABEC-3 sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems - Enduro ABEC-3 bearings
$26.00
TruVativ Power Spline Bottom Bracket fits proprietary powerspline design popular as OE spec with many moderate-price TruVativ cranks. • Proprietary spline design popular as OE spec with many moderate-price TruVativ cranks • Crank bolts are included
$50.00 - $54.00
Striking the balance between light weight, long life and durability, TruVativ's Giga Pipe Team SL Bottom Bracket uses 3 sealed cartridge bearings to provide smooth pedaling season after season. For serious strength, the Giga Pipe boasts CNC-machined aluminum cups and a stiff chromoly spindle, too.
$7.99
Grips are a key point of contact between you and your bike. Comfortable grips are a must-have. Product details - Designed for use on kids' bikes with twist shifters - Set of two grips Specifications - Diameter: 22.2mm - End Type: Closed - Lock-on: No - Material: Kraton Rubber
$9.50
Replacement levers for Trek kids' bikes. Genuine replacement parts Replace your worn or damaged brake levers for proper braking operation. - Sized for smaller hands - Two-finger lever operation
$9.99
Genuine replacement parts When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered. Upgrade or refresh your bike. - Replacement downtube strike plate for 2012 Madone - Self adhesive
$17.99
Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt
$17.99
Get back on the trail with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 1-bolt
$17.99
Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt
$17.99
Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt
$19.99
Get back on the trail with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 142x12mm Thru Axle - Mounting location: Rear drive side - Attachment: Thru axle nut
$20.99
Get back on the trail with a quality replacement hanger. - Trek/Fisher full suspension rocker pivot suspension hardware - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 148x12mm Thru Axle - Mounting location: Rear drive side - Attachment: Thru axle nut
$24.99
Get back on the trail with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: Thru axle nut
$24.99
Get back on the trail with a quality replacement hanger. - Attachment hardware is sold separately - For use with 135x5mm hubs Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: Thru axle nut
$24.99
Get back on the trail with a quality replacement hanger. - Attachment hardware is sold separately - For use with 142x12mm, 148x12mm, 157x12mm, and 197x12mm hubs Specifications: - Size: Rear drive side, Thru Axle - Mounting location: Rear drive side - Attachment: Thru axle nut
$29.99
Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 148x12mm Thru Axle - Mounting location: Rear drive side - Attachment: Thru axle nut
$31.99
Genuine replacement parts Genuine Trek replacement part to unload the battery. Original Equipment specifications. Compatible with Bosch Powertube RIB batteries. - The handle comes with the spring and RIB handle Spring loaded plunger - Hardware should be ordered separately
$31.99
Genuine replacement parts Get back on the trail with a quality replacement hanger. Don't be left hanging. - Attachment hardware is sold separately - Compatible with Superfly SS 2015-2016 (142x12mm OLD) - Compatible with Stache 29+ 2016-2022 (148x12mm OLD) - Compatible with 1120 2018-2022 (148x12mm OLD) - Compatible with Farley 2016-2022 (197x12mm OLD)
$34.99
Handlebar tape that's made from partially recycled materials and designed for a comfortable, durable, and tacky grip feel. Tape for confident and comfortable riding Perfect for white-knuckle crits, 100-mile gravel rides, and weekend adventures, EcoTack handlebar tape has a tacky, confidence-inspiring grip with vibration-damping comfort. Plus, It's made from partially recycled material. - 3mm of shock-absorbing foam elevates comfort - Super-tacky texture offers a no-slip grip - Made from 45% recycled materials and 29% biobased foam - Ideal stretch for quick and easy installation - Adhesive backing simplifies installation - Finishing strips and reflective Trek bar end plugs included - Weight: 108g
$36.99
Genuine replacement parts Prowheel: Crank it up! Shift smooth, use matching chainrings. - Bosch Generation 3 specific e-bike narrow wide chainring - Aluminum spider and steel chainring -104mm BCD
$42.00
Genuine replacement parts Revive your ride with a fresh set of bearings for your BB90/95 equipped carbon bike. Proprietary replacement bottom bracket for the Trek family of bikes. - Only compatible with 24mm cranks - Not compatible with BB30 cranks
$52.99
Genuine replacement parts Praxis bottom brackets feature precise tolerances and quality materials to ensure smooth, quiet spinning for many miles. No more creaking. Smooth operation. Fast bearing replacement. - For use with Trek T47 frames with 85.5mm bottom bracket shells - Only compatible with Praxis M30 cranks
$52.99
Genuine replacement parts Praxis bottom brackets feature precise tolerances and quality materials to ensure smooth, quiet spinning for many miles. No more creaking. Smooth operation. Fast bearing replacement. - For use with Trek T47 frames with 85.5mm bottom bracket shells - Compatible with Shimano 24mm cranks
$52.99
Genuine replacement parts The e*thirteen chain guide developed with Bosch helps keep the chain locked on the chainring when pedaling over rough terrain. Provides confident and consistent pedaling over rough terrain. - Two-bolt nylon backplate mounts directly to Bosch motor - 34-38 tooth compatibility - Does not fit traditional ISCG mounts - Designed for Trek 2020-2021 and select 2022 Rail & Powerfly models - Included hardware is available separately to convert to 55mm chainlines (See Service Parts)
$54.99
Platform pedals with a durable nylon design and replaceable pins for consistent grip. - Durable nylon body with a proven shape for comfort and confidence - Virtual concave design with pin placement secures your shoe for pedaling and descending - Durable axle spins on sealed cartridge bearings - Replaceable steel traction pins - Install with 8mm hex wrench
$63.99
Genuine replacement parts Get back on your bike with these replacement chainrings. Replacement chainring for your eBike. - Compatible with Bosch Gen 4 - With spider and bash guard
$99.99
Our best flat pedal features replaceable traction pins and fully serviceable internals for lasting performance. - Dial in your preferred traction with tunable pin placement and contact height - Concave pedal body locks in foot placement for pedaling and descending - Durable axle spins on sealed cartridge bearings - Replaceable barbed traction pins - Pedal body is made from 6061-T6 aluminum - Install with 8mm hex wrench
$119.99
Genuine replacement parts Genuine Trek replacement part to protect your eBike battery. Keep the dirt out. - For use with removable integrated battery system - For use with 625Wh Bosch RIB batteries
$129.99
Genuine replacement parts Get back on the road with a genuine replacement fork. The fork you need. - Original replacement fork - Color matched for direct compatibility
$24.99
Sintered Metallic replacement pads for the DH-R EVO, G-Spec DH-R, Quadiem, Quadiem, Slate T4, Slate G-Spec and "Select 4-Piston Tektro Brakes" TRP Metallic pads are made up of hardened metallic ingredients, which are bound together with pressure and heat. Metallic pads fade at a higher temperature than their resin or semi-metallic counterparts and offer better performance in wet and muddy conditions. - Sintered Full Metallic compound - Fits all TRP four piston calipers and Tektro four piston calipers - Color: Gold - Sold per wheel
$75.00
In today’s fast-paced world of riseless flat bars and far-too-aggressive-for-our-liking cockpits, Surly harkens back to simpler times. They wanted a handlebar that would suffice for a relaxed cruise to a favorite windowless bar, but would also be suitable should a person decide to take the long way home. The Sunrise Bar is a cruiser bar, a trail bar, and a BMX bar all rolled into one. It has a 22.2mm clamp diameter, but Surly included some Problem Solvers shims so you can mount it up to your fancy 31.8mm stem. Material: CroMoly steel Clamp diameter: 22.2mm; Includes shims for 31.8mm clamp Width: 820mm; Can be cut to 720mm Rise: 83mm Sweep Angle: 14.7 degree backsweep, 6.7 degree upsweep Weight: 778g including shims Color: Black
$1.50
- Aluminum w/lock nut - 18mm long/6mm O.D.
$1.50
Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!
$1.99
- 8x1mm Allen head
$2.00
- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction
$2.99
- Sunlite Cottered Pins
$2.99
- For MTB levers - 7mm x 1mm - Aluminum construction
$3.00
- Steel construction - Adapts BMX chainrings with 22mm hole to 19mm spindles - Bag of 10
$4.00
- Fits cantilever brakes - Sold individually
$4.99
- Replacement link wire for cantilever brakes
$4.99
- Chrome allen seat binder bolt
$4.99
- Large Flange-Fits Splined MX Cranks - Sold in pairs
$5.00
- Standard replacement cantilever/v-brake bosses
$9.99
- One-piece bottom bracket cup set - Bearings included - Fits smaller american juvenile/youth sized BB - Shell: 65mm - Cup Material: Steel - Weight: 173 grams
$9.99 - $19.99
- Forged steel - 24 TPI
$9.99 - $19.99
• Aluminum • CNC-finished
$9.99
- Replacement front cable hanger - Steel construction - Includes barrel adjuster - Steerer Diameter: 25.4mm
$19.99 - $24.99
• Square taper interface • Only includes left crank
$19.99
- Horizontal square interface - Only includes left crank
$19.99
- Galvanized steel pedal body - 2-piece block platform - Boron axle - Plastic blocks w/ integrated reflector - 553g pair
Page 1 of 7 Next page