Skip to main content

Filter By:

Car Racks

$24.99
Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.
$579.95
The HighNoon FC is the first and only rack in the RockyMounts' family that supports use of bikes with fenders. The rack includes an upswept base allowing for better departure angle, as well as a tiered platform for handlebar clearance. The dual strap system allows for secure transport for bikes with and without fenders. - Compatible with bikes with fenders - Compatible with bikes without fenders - Carries 2 bikes, up to 60 lbs per tray (120 lbs total). 2" variant is expandable to 3 bikes up to 45 lbs per tray, with Add-On - No contact with frame, secures bicycle by front wheel - Carries road tires up to 5.0" fat bike tires, and diameters from 20" to 29" - Compatible with bicycle wheelbases from 36" to 50" - Folds flat against the vehicle and tilts down 30 degrees to allow for hatch access - Includes anti-wobble hitch pin - If you want to fit both 1.25" and 2" size hitches, get the 1.25" and the adaptor sleeve. This configuration does not allow for the use of an Add-On - Includes locking hitch bolt, cable lock, and standard lock pods, keyed alike - Rack weight 39 lbs (shipping weight 49 lbs) - Fit Memo- For cargo vans (vehicles with flat backs), Depending on hitch placement, handlebar width, an 8" Hitch Extension may be required for wide mountain bike handlebars to clear the doors.
$199.95
Expand the capacity of your HighNoon FC or HighNoon FC Solo with this Add-On. - Compatible with 2" HighNoon FC to expand carrying capacity to 3 bikes, or HighNoon FC Solo to expand capacity to 2 bikes. - Lowers max weight capacity from 60 lbs per bike to 45 lbs per tray - No contact with frame, secures bicycle by front wheel - Carries road tires up to 5.0" fat bike tires, and diameters from 20" to 29" - Compatible with bicycle wheelbases from 34" to 52" - Rack weight 14lbs (shipping weight 20lbs) - NOT COMPATIBLE with BackStage, MonoRail, SplitRail, GuideRail (Only fits HighNoon FC 2" or Solo)
$379.95
The HighNoon FC Solo is the first and only rack in the RockyMounts' family that supports use of bikes with fenders. The rack includes an upswept base allowing for better departure angle, as well as a tiered platform for handlebar clearance. The dual strap system allows for secure transport for bikes with and without fenders. - Compatible with bikes with fenders - Compatible with bikes without fenders - Carries 1 bike, up to 60 lbs. Expandable to 2 bikes, up to 60 lbs per tray, with Add-On - No contact with frame, secures bicycle by front wheel - Carries road tires up to 5.0" fat bike tires, and diameters from 20" to 29" - Compatible with bicycle wheelbases from 36" to 50" - Folds flat against the vehicle and tilts down 30 degrees to allow for hatch access - Includes anti-wobble hitch pin - Includes locking hitch bolt, cable lock, and standard lock pods, keyed alike - Rack weight 29 lbs (shipping weight 35 lbs) - Fit Memo- For cargo vans a fit check is required. Depending on hitch manufacturer, handlebar width, vehicle wheelbase, and accessories an 8" Hitch Extension may be required for handlebars to clear the doors
$109.00
- Fits almost anything with a tailgate. - Fold-out panel secures the second bike’s tire to keep your tailgate paint safe. - Top edge adjustment straps provide a fit tailored to your tailgate’s shape. - Micro-brushed inner lining protects your tailgate. - Inner-raised bumpers hold bike securely. - Offset outer blocks hold your CSU to limit wheel movement. - Downtube straps secure your bike to the pad. - Includes 2 eBike downtube extension straps.
$209.00 - $219.00
Shuttle Saver - Our new T2 pad is made to fit any shape of tailgate, and has an adjustable rear camera panel - both RF exclusive, patent pending features. Carry up to 6 bikes with no bike on bike crime with raised bumpers + downtube straps. Backup Plan - Exclusive to the T2 is the adjustable rear panel that allows for easy adaptation to any rear camera + handle position. Shape Shifter - Six adjustment straps along top edge of the installed pad provide a fit tailored to your tailgate’s shape - even curved! Just Say No - To bike on bike crime. The T2 features raised bumpers in the truck box that keep frame downtubes in place and secure, minimizing contact while shuttling. Specs - Construction: PVC tarpaulin with micro-brushed inner lining - Adjustment: Top edge adjustment, camera window adjustment - Other: Raised bike spacers and padding, hook-and-loop frame straps, lock loop Bike Capacity - Mid-Size Truck (Tacoma or similar): 5-bike - Full-Size Truck (Ford F-150, F-350 or similar): 6-bike
$98.00
The Access Bike Ramp makes it easy to load your bike onto your Kuat NV 2.0 hitch rack.
$69.00
For those cases where fitment just isn't right. The Hi-Lo is a 2" hitch Extension & Rise/Drop built with Kuat style. It provides 7" or 10" of extension and 2.125" of rise/drop. The Hi-Lo comes with a threaded hitch pin to ensure a tight fit in your receiver. Approved for use with the Kuat NV 2.0, Base 2.0, Sherpa 2.0 and Transfer family.
$598.00
When your solo ride turns into a weekend expedition with friends, the NV Base 2.0 Add-On lets you increase the NV Base 2.0 carrying capacity from two to four bikes in less time than it takes your friends to decide who gets to sit up front. - Adjustable front tire cradle system - Fully integrated cable locks - Trail Doc compatible - Front tire ratchet design with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - Premium matte powder coat - Compatible with 2-inch NV Base 2.0 - Increases 2-inch NV 2.0 carrying capacity to 4 bicycles weighing up to 40 pounds each - Holds wheelbases up to 48-inch and tires as large as 4.8-inch - Quick change from 2 to 4 bikes
$749.00
Kuat's NV 2.0 Base is loaded with features that make it one of the most equipped platform racks on the planet. This darkened brute features Kuat's foot lever pivot release, adjustable cradles for increased bike fit, integrated cable locks, a hand-tight cam system, and a ballistic black powder coat that will stand up to years of abuse. - Adjustable front tire cradle system - Re-designed pivot with optional foot assist - Fully integrated cable locks and hitch lock included - Front tire ratchet with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - No-tool install with hand tight hitch cam system - Premium matte powder coat - 2 Bike capacity up to 60 lbs. each - Holds wheelbases up to 48-inch and tires as large as 4.8-inch - Available in both 2-inch & 1.25-inch hitch sizes - Dedicated 2-inch model is able to carry up to 4 bikes with optional NV Add-On 2.0 Base
$629.00
The all-new aluminum Sherpa 2.0 resets the standard for user-friendly adventure. Folding tire cradles create an abundance of clearance while Kuat's foot-actuated pivot lever lets you bask in the glory of carrying a bike or eating a breakfast burrito while unfolding your rack at the same time. With features designed around your lifestyle, this lightweight rack is as easy to take off as it is to leave on. - Re-designed pivot with optional foot assist - Semi-integrated bike lock - Front tire ratchet design with an intuitive release - Rear tire cradle features a co-molded strap to protect wheels - Folding front cradle adds space between rack and vehicle - No-tool install with hand tight hitch cam system - Gloss metallic powder available in 3 colors - Low profile arced design delivers an amazing look - 2 Bike capacity up to 40 lbs. each - Holds wheelbases up to 47-inch and tires as large as 3-inch - Increased spacing between bikes to 14-inch - Lightweight platform rack design as low as 32lbs (assembled) - Available in both 2-inch & 1.25-inch hitch sizes
$449.00 - $549.00
The Transfer v2 is more solid than ever. From the steel construction of the original to a new Flatlock hitch cam for enhanced stability in tow. Plus, a semi-integrated cable lock for an upgrade in security. The best part? The new Transfer v2 has the modular configurations available so you get a multi-rider rack at an everyone-friendly price. - Flatlock cam for 2", ball cam for 1.25" - Includes semi-integrated bicycle cable lock - Tamper-resistant hitch security - More robust hitch design for enhanced stability in tow - Holds up to a 50" wheelbase bike (previously 47") - Holds wheels 18"-29" (previously 20"-29") - Holds tires up to 5" with accessory strap (previously 4.5") + better hook clearance for loading fat bikes - Automotive-grade 750 hour salt spray hardware - Dedicated 2" hitch version in the 2 bike configuration can be directly mounted on campers, recreational vehicles, or trailers with CHASSIS MOUNTED RECEIVERS ONLY.
$39.99
So the international bike builder didn’t consider your bike rack design when creating his new full suspension frame? No worries. Kuat’s Ubar can adapt almost any frame to fit our Alpha or Beta rack. Features - Adapts oddly shaped frames for use with hanging style racks - Spring loaded for a solid fit - Coated hooks (prevent wear on your bike) - Installs in seconds - Fits most bikes
$36.99
- Powdercoated steel body with 9mm skewer & hole in handle for padlock
Page 1 of 1