Packs/Racks/Baskets

The Mag-Tank takes a new twist on top tube bags. Instead of a zippered opening, access to the bag is by a smartly contoured top flap held in place by a magnetic buckle with mechanical engagement (read - the magnet aids in closure, while load is placed on a connection). It will not unintentionally open and spill your gummy bears when you end up in the trees with your bike upside down like a conventional magnetic closure would. You can easily open the bag one handed by pulling outward on the cord loop and you have access to the whole top of the bag. To close, just flick the flap down and the buckle self-engages! The Mag-Tank is just a hair smaller than Revelate's Gas Tank to prevent leg movement from hitting the edge of the flap opening. Please note - while the cover to this bag is designed to shed rain and spray, due to the large panel opening it is not a sealed bag or waterproof bag. Features: - One-handed access while riding - Side panels stiffened with HDPE plastic sheets - Wrap around panel is padded with closed-cell foam - Interior lined with yellow fabric for greater visibility - Adjustable height daisy chain front attachment with a spacer block to clear stem clamp bolts - Beefy top tube strap has gripper material with double back wrap for bomber stability - Made in the USA with domestic and imported materials. Sizing: - Length: 8.5" - Max height: 5" - Width at stem: 2.5" - Tapers down to 2.5" tall and 1.5" wide along the top tube Specifications: - Weight: 4.5 oz. - Volume: Approximately 65 cubic inches - Materials: VX21 & 42 XPac, 420-denier yellow and red lining, closed-cell foam-padded tube sections, HDPE sheets

The Egress Pocket is a waterproof, seam-welded, roll-top handlebar bag. It integrates with the Sweetroll and Harness, or can be used standalone on the handlebars with the included strap kit. The side profile of the Egress is curved slightly to contour around the main drybag so the bags nest well when the straps are tightened. This bag was built with the distance traveler in mind. It features a removable padded liner, giving you the option to protect electronics when the bag is removed and dropped at camp. The liner also features a small zippered pocket. On the outside, the Egress has a small carry handle and D-rings to attach a minimalist shoulder strap (included), making it a versatile travel companion. A jacket or extra layer can then be stored in the straps that typically attach it to the Sweetroll & Harness. Lastly, you can even run your belt through a series of webbing slots turning it into a hip pack. The webbing and hook closure with high-cycle-life Velcro make for a secure and durable closure. Features: - Waterproof - Contoured sides - Roll top closure with hook strap - Removable padded liner - Small zippered pocket in removable liner - Stand alone mounting and off bike versatility - Size: 3" depth 9.5" width 7-8" height - Weight: 10.0 oz complete, 7.5 oz without extra straps and liner removed. - Volume: 175 cu in approx. - Materials: 210 Denier Ripstop Nylon double side laminated with TPU Hypalon reinforcements

Similar to the original MATTONE, a high friction Hypalon strap with BOA Closure completes the package. Making more than 15x the power of Velcro, the BOA Closure uses a ratcheting mechanism that will not creep or loosen even under the most extreme vibration and impact. This ensures the MATTONE will remain 'high and tight' under your saddle until you need to access it... no swinging, swaying, or rattling... ever

A secure, direct-mounted saddle bag with quick connections for the Blendr Fendr and rear lights - Quickly connect Blendr Fendr and rear lights with purposeful mounts in seconds - Two internal pockets reduce rattling and hi-vis material makes it easy to find what you need - Made with durable, soft, and water-resistant nylon with an easy-to-use zipper - Integrated design that mounts directly to compatible saddles with 2 m5 hex bolts - Compatible with Aeolus, Verse, Boulevard, and Commuter saddles. Not compatible with RSL-level saddles - Included: bag, mount, spacer, one pair of short bolts, and one pair of longer bolts

Adds functionality. Adds style. - Designed specifically for the 2021-2023 Powerfly FS - Requires specific 2021 Trek Powerfly FS rear full fender to mount - Compatible with MIK, standard trunk bags, and panniers - Does not include mounting hardware - Compatible with 27.5" and 29" wheel Powerfly

Adds functionality. Adds style. - Compatible with 27.5" and 29" wheel Powerfly - Does not include mounting hardware - Confirm compatibility before use

A durable, carry-everything full frame pack that installs quickly to let you adventure farther. - Available in four sizes to best fit more frames and adventures - Mount with thumb screws (sold separately) to bikes with integrated boss mounts - Large main pocket and smaller compartment pocket make it easy to stay organized - Gold lining and internal mesh pockets make finding your gear a cinch - Water-resistant construction helps keep your gear dry - Durable materials and robust zippers are designed to last

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Three slots for additional adjustments over the B-RAD 2 base - Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts

The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads