Parts

Genuine replacement parts Get back on your bike with these replacement chainrings. Replacement chainring for your eBike. - Compatible with Bosch Gen 4 - With spider and bash guard

Our best flat pedal features replaceable traction pins and fully serviceable internals for lasting performance. - Dial in your preferred traction with tunable pin placement and contact height - Concave pedal body locks in foot placement for pedaling and descending - Durable axle spins on sealed cartridge bearings - Replaceable barbed traction pins - Pedal body is made from 6061-T6 aluminum - Install with 8mm hex wrench

Genuine replacement parts Genuine Trek replacement part to protect your eBike battery. Keep the dirt out. - For use with removable integrated battery system - For use with 625Wh Bosch RIB batteries

Genuine replacement parts Get back on the road with a genuine replacement fork. The fork you need. - Original replacement fork - Color matched for direct compatibility

Sintered Metallic replacement pads for the DH-R EVO, G-Spec DH-R, Quadiem, Quadiem, Slate T4, Slate G-Spec and "Select 4-Piston Tektro Brakes" TRP Metallic pads are made up of hardened metallic ingredients, which are bound together with pressure and heat. Metallic pads fade at a higher temperature than their resin or semi-metallic counterparts and offer better performance in wet and muddy conditions. - Sintered Full Metallic compound - Fits all TRP four piston calipers and Tektro four piston calipers - Color: Gold - Sold per wheel

In today’s fast-paced world of riseless flat bars and far-too-aggressive-for-our-liking cockpits, Surly harkens back to simpler times. They wanted a handlebar that would suffice for a relaxed cruise to a favorite windowless bar, but would also be suitable should a person decide to take the long way home. The Sunrise Bar is a cruiser bar, a trail bar, and a BMX bar all rolled into one. It has a 22.2mm clamp diameter, but Surly included some Problem Solvers shims so you can mount it up to your fancy 31.8mm stem. Material: CroMoly steel Clamp diameter: 22.2mm; Includes shims for 31.8mm clamp Width: 820mm; Can be cut to 720mm Rise: 83mm Sweep Angle: 14.7 degree backsweep, 6.7 degree upsweep Weight: 778g including shims Color: Black

- Aluminum w/lock nut - 18mm long/6mm O.D.

Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!

- 8x1mm Allen head

- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction

- Sunlite Cottered Pins

- For MTB levers - 7mm x 1mm - Aluminum construction

- Steel construction - Adapts BMX chainrings with 22mm hole to 19mm spindles - Bag of 10

- Fits cantilever brakes - Sold individually

- Replacement link wire for cantilever brakes

- Chrome allen seat binder bolt

- Large Flange-Fits Splined MX Cranks - Sold in pairs

- Standard replacement cantilever/v-brake bosses

- One-piece bottom bracket cup set - Bearings included - Fits smaller american juvenile/youth sized BB - Shell: 65mm - Cup Material: Steel - Weight: 173 grams

- Forged steel - 24 TPI

• Aluminum • CNC-finished

- Replacement front cable hanger - Steel construction - Includes barrel adjuster - Steerer Diameter: 25.4mm

- Fits Shimano and ISIS BBs - Single key release - Shell: 15mm SHI/ISIS axle bolt one-key release - Sold in pairs

• Square taper interface • Only includes left crank

- Horizontal square interface - Only includes left crank

When you need to move your handlebars up, install Sunlite's Chromoly Quill Stem Extender. One end goes inside the steerer tube and your quill stem inserts into the top. It provides 8 1/4 inches of rise and is compatible only with quill stems and steerer tubes.

- Galvanized steel pedal body - 2-piece block platform - Boron axle - Plastic blocks w/ integrated reflector - 553g pair

Sunlite's Adjustable Stem adjusts from 0 to +60 degrees so that you can place your handlebars wherever they are most comfortable. It boasts light and durable aluminum construction with steel bolts. It fits on 1- and 1 1/8-inch forks and accepts 25.4mm- and 31.8mm-diameter handlebars too, with included shims. Plus, its 2-bolt clamp makes changing bars easy and holds fast.

• Aluminum • Coil spring provides plush suspension • Adjustable pre-load design • Micro-adjust seat clamp • 450 grams

The most advanced foam ever used in bar tape along with an extremely long wearing and tacky top layer, this is the ultimate in comfort. - 2.5mm of cushion similar dampening to 3.5mm in other tapes. - Laser engraved aluminum end plug. - Fully adhesive finishing tape. - Butterfly clamp cover that doesn't add bulk. - SILCA Crash Replacement Program